| taille du texte : S-M-L |
| impression | intranet
Abdellatif IMAD professeur
Lille 1

Contact

téléphone 03.28.76.73.93
fax 03.28.76.73.01
e-mail
équipe    — Laboratoire de Mécanique des Solides et des Fluides Complexes (LMSFC)
bâtiment et bureau    Polytech'Lille

Recherche

 

Publications

titre
année, auteur(s)
type  
Analysis of local and global localizations on the failure phenomenon of 3D interlock woven fabrics under ballistic impact
2017, Chu Tuan-Long; Ha Minh Cuong; Imad Abdellatif
Composite Structures
article     
Effective thermal and mechanical properties of randomly oriented short and long fiber composites
2017, Sukiman Muhamad Shafiq; Kanit Toufik; N'Guyen F.; Imad Abdellatif; El Moumen Ahmed; Erchiqui Fouad
Mechanics of Materials
article     
Modeling of the effect of the void shape on effective ultimate tensile strength of porous materials: Numerical homogenization versus experimental results
2017, Masmoudi M.; Kaddouri W.; Kanit Toufik; Madani S.; Ramtani S.; Imad Abdellatif
International Journal of Mechanical Sciences
article     
A numerical investigation of the influence of yarn mechanical and physical properties on the ballistic impact behavior of a Kevlar KM2® woven fabric
2016, Chu Tuan-Long; Ha Minh Cuong; Imad Abdellatif
Composites Part B: Engineering
article     
Development of a numerical model for the ballistic penetration of Fackler gelatine by small calibre projectiles
2016, Gilson Lionel; Rabet L.; Imad Abdellatif; Kakogiannis D.; Coghe F.
The European Physical Journal Special Topics
article     
Effect of Wood Fillers on the Viscoelastic and Thermophysical Properties of HDPE-Wood Composite
2016, Tazi Mostafa; Sukiman Muhamad Shafiq; Erchiqui Fouad; Imad Abdellatif; Kanit Toufik
International Journal of Polymer Science
article     
Effective transverse elastic properties of unidirectional fiber reinforced composites
2016, Beicha Dalila; Kanit Toufik; Brunet Yves; Imad Abdellatif; El Moumen Ahmed; Khelfaoui Y.
Mechanics of Materials
article     
Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact
2016, Ha Minh Cuong; Imad Abdellatif; Boussu François; Kanit Toufik
International Journal of Impact Engineering
article     
Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061
2016, Dorbane Abdelhakim; Mansoor Bilal; Ayoub Georges; Shunmugasamy Vasanth Chakravarthy; Imad Abdellatif
Materials Science and Engineering: A
article     
Microstructural observations and tensile fracture behavior of FSW twin roll cast AZ31 Mg sheets
2016, Dorbane Abdelhakim; Ayoub Georges; Mansoor Bilal; Hamade R.F.; Kridli G.; Shabadi Rajashekhara; Imad Abdellatif
Materials Science and Engineering: A
article     
Modeling of the effect of particles size, particles distribution and particles number on mechanical properties of polymer-clay nano-composites: Numerical homogenization versus experimental results
2016, Djebara Y.; El Moumen Ahmed; Kanit Toufik; Madani S.; Imad Abdellatif
Composites Part B: Engineering
article     
On the effect of inclusion shape on effective thermal conductivity of heterogeneous materials
2016, Kaddouri W.; El Moumen Ahmed; Kanit Toufik; Madani S.; Imad Abdellatif
Mechanics of Materials
article     
Characterization of Polymeric Membranes Under Large Deformations Using Fluid-Structure Coupling
2015, Erchiqui Fouad; Souli Mhamed; Kanit Toufik; Imad Abdellatif; Boudlal Abdelaziz; El Moumen Ahmed
International Journal of Applied Mechanics
article     
Computational thermal conductivity in porous materials using homogenization techniques: Numerical and statistical approaches
2015, El Moumen Ahmed; Kanit Toufik; Imad Abdellatif; El Minor H.
Computational Materials Science
article     
Effect of reinforcement shape on physical properties and representative volume element of particles-reinforced composites: statistical and numerical approaches
2015, El Moumen Ahmed; Kanit Toufik; Imad Abdellatif; El Minor H.
Mechanics of Materials
article     
Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures
2015, Dorbane Abdelhakim; Ayoub Georges; Mansoor Bilal; Hamade R.F.; Kridli G.; Imad Abdellatif
Materials Science and Engineering: A
article     
A multiscale approach and microstructure design of the elastic composite behavior reinforced with natural particles
2014, El Moumen Ahmed; Imad Abdellatif; Kanit Toufik; Hilali E.; El Minor H.
Composites Part B: Engineering
article     
Computation of effective behavior of isotropic transverse composite in nonlinear problems
2014, Benhizia A.; Kanit Toufik; Outtas T.; Madani S.; Imad Abdellatif
Mechanics Research Communications
article     
Effect of overlapping inclusions on effective elastic properties of composites
2013, El Moumen Ahmed; Kanit Toufik; Imad Abdellatif; Minor Hassan E.L.
Mechanics Research Communications
article     
Numerical analysis of a ballistic impact on textile fabric
2013, Ha Minh Cuong; Imad Abdellatif; Kanit Toufik; Boussu François
International Journal of Mechanical Sciences
article     
An experimental study of loading parameters effect on fatigue crack closure in 12NC6 steel
2012, Ould Chikh B.; Imad Abdellatif; Meddah M.; Bouchouicha B.; Benguediab Mohamed
Mechanics of Materials
article     
Effect of Frictions on the Ballistic Performance of a 3D Warp Interlock Fabric: Numerical Analysis
2012, Ha Minh Cuong; Boussu François; Kanit Toufik; Crepin David; Imad Abdellatif
Applied composite materials
article     
Numerical study on the effects of yarn mechanical transverse properties on the ballistic impact behavior of textile fabric
2012, Ha Minh Cuong; Imad Abdellatif; Boussu François; Kanit Toufik; Crepin David
Journal of Strain Analysis for Engineering Design
article     
On failure mode analysis in a bolted single lap joint under tension-shearing
2012, Dang-Hoang Thong; Herbelot Christophe; Imad Abdellatif
Engineering Failure Analysis
article     
On the Analysis of Die Wear in Wire-Drawing Process
2012, Haddi A.; Imad Abdellatif; Vega Guillaume
Tribology Transactions
article     
Prediction of fatigue crack initiation lives at elongated notch roots using short crack concepts
2012, Castro Jaime Tupiassú Pinho; Meggiolaro Marco Antonio; Miranda Antonio Carlos de Oliveira; Wu Hao; Imad Abdellatif; Benseddiq Noureddine
International Journal of Fatigue
article     
Endommagement des assemblages (boulonnés et soudés par friction malaxage) : aspects expérimentaux et simulation numérique
2012, Herbelot Christophe; Dang-Hoang Thong; Imad Abdellatif; Benseddiq Noureddine
Workshop Sidi Bel Abbès
communication     
Analysis of temperature and speed effects on the drawing stress for improving the wire drawing process
2011, Haddi A.; Imad Abdellatif; Vega Guillaume
Materials & Design
article     
Analysis on failure mechanisms of an interlock woven fabric under ballistic impact
2011, Ha Minh Cuong; Boussu François; Kanit Toufik; Crepin David; Imad Abdellatif
Engineering Failure Analysis
article     
Effect of Chemical treatment on Flexure Properties of Natural Fiber-reinforced Polyester Composite
2011, Rokbi Mansour; Osmani Hocine; Imad Abdellatif; Benseddiq Noureddine
Procedia Engineering
article     
Numerical multi-scale modeling for textile woven fabric against ballistic impact
2011, Ha Minh Cuong; Kanit Toufik; Boussu François; Imad Abdellatif
Computational Materials Science
article     
Numerical simulation of the crack shape for the thermo-mechanical loaded valve
2011, Wu Hao; Zhong Zheng; Benseddiq Noureddine; Imad Abdellatif
Engineering Failure Analysis
article     
On experimental investigation of failure process of woven-fabric composites
2011, Rokbi Mansour; Osmani Hocine; Benseddiq Noureddine; Imad Abdellatif
Composites Science and Technology
article     
Mechanical behaviour of a friction stir spot welding lap under static loading
2011, Herbelot Christophe; Dang-Hoang Thong; Imad Abdellatif
Conférence Advances in Materials and Processing Technologies
communication     
’Essais de traction instrumentés- High speed friction stir welding of a 6082 T6 aluminium alloy
2011, Herbelot Christophe; Imad Abdellatif; Avetland-Fénoël Marie Noëlle; Taillard Roland
commission mixte AFM/SF2M
communication     
Caractérisation viscoélastique du comportement d'une membrane thermoplastique et modélisation numérique de thermoformage
2010, Erchiqui Fouad; Imad Abdellatif; Mouloudi A.; Hsnaoui F.S.
The Canadian Journal of Chemical Engineering
article     
Damage mechanisms under tension-shear loading in a friction stir spot welding (FSSW)
2010, Herbelot Christophe; Dang-Hoang Thong; Imad Abdellatif; Benseddiq Noureddine
Science and Technology of Welding and Joining
article     
Fracture toughness prediction of a valve body: numerical analysis
2010, Wu Hao; Benseddiq Noureddine; Imad Abdellatif
Engineering Failure Analysis
article     
Modeling of the propagation of cracks in a welded structure
2010, Ghazi A.; Mazari Mohamed; Imad Abdellatif; Benamar B.
Computational Materials Science
article     
On the prediction of the residual fatigue life of cracked structures repaired by the stop-hole method
2010, Wu Hao; Imad Abdellatif; Benseddiq Noureddine; Castro Jaime Tupiassú Pinho; Meggiolaro Marco Antonio
International Journal of Fatigue
article     
Parametric studies of the process of friction spot stir welding of aluminium 6060 T5 Alloys
2010, Merzoug Mohamed; Mazari Mohamed; Berrahal Lahcene; Imad Abdellatif
Materials & Design
article     
Rupture and damage mechanism analysis of a bolted assembly using coupling techniques between A.E. and D.I.C.
2010, Dang-Hoang Thong; Herbelot Christophe; Imad Abdellatif
Engineering Structures
article     
Structure and Mechanical Properties of Friction Stirred Beads of 6082-T6 Al Alloy and Pure Copper
2010, Avetland-Fénoël Marie Noëlle; Taillard Roland; Herbelot Christophe; Imad Abdellatif
Materials Science Forum
article     
Mécanismes d’endommagement des assemblages boulonnés et soudés par friction malaxage (FSSW) : aspects expérimentaux et simulation numérique
2010, Herbelot Christophe; Dang-Hoang Thong; Imad Abdellatif; Benseddiq Noureddine
workshop Mascara
communication     
An experimental analysis of fracture Mechanisms of short glass fibre reinforced polyamide 6,6 (SGFR-PA66)
2009, Mouhmid Bouchaib; Imad Abdellatif; Benseddiq Noureddine; Lecompte D.
Composites Science and Technology
article     
Analysis of ductile tearing using a local approach to fracture
2009, Taktak Rym; Benseddiq Noureddine; Imad Abdellatif
Fatigue & Fracture of Engineering Materials and Structures
article     
Analysis of the effect of temperature on the creep parameters of composite material
2009, Kouadri-Boudjelthia A.; Imad Abdellatif; Bouabdallah A.; Elmeguenni Mohamed
Materials & Design
article     
Influence of the ferrite rate on the tenacity of a welded joint in austenitic stainless steel: Experimental study and numeric modelling
2009, Bouchouicha B.; Zemri M.; Benguediab Mohamed; Imad Abdellatif
Computational Materials Science
article     
Investigation of process parameters effect on the copper-wire drawing
2009, Vega Guillaume; Haddi A.; Imad Abdellatif
Materials & Design
article     
Fracture and domage mecanisms in a bolted joints’
2009, Dang-Hoang Thong; Herbelot Christophe; Imad Abdellatif
9ème Congrès de Mécanique
communication     
pages